Wireless Array
96 Viewing Status on the Wireless Array
• Rx Threshold: Shows the receive threshold for each IAP.
• Stations: Informs you how many client stations are currently
associated with each IAP.XN Arrays can handle up to 96 concurrent
users per individual IAP, thus 16-port XN models can handle 1536
users per Array.
• WDS Link/Distance: The WDS Link on this radio (if any), and
whether the link has been set to support Long Distance Links. See
“WDS” on page 358.
• MAC Address/BSSID: Shows the MAC address for each IAP.
• Description: The description (if any) that you set for this IAP.
Network Assurance Section
This section shows the results of ongoing network assurance testing. This
is the same as information shown in “Network Assurance” on page 109.
Figure 46. Network Assurance and Operating Status
The Array checks connectivity to network servers that you have
configured (for example, DNS and NTP servers) on an ongoing basis. For
each Setting, this list shows the server’s Host Name (if any), IP Address,
and Status.
To Next Page
Loading...
Need help?
General
