Xirrus XR-520 User Manual

Wireless Array
Viewing Status on the Wireless Array 91
Viewing Status on the Wireless
Array
These windows provide status information and statistics for your Array using the
product’s embedded Web Management Interface (WMI). You cannot make
configuration changes to your Array from these windows. The following topics
have been organized into functional areas that reflect the flow and content of the
Status section of the navigation tree in the left frame of the WMI.
 “Array Status Windows” on page 92
 “Network Status Windows” on page 100
 “RF Monitor Windows” on page 111
 “Station Status Windows” on page 122
 “Statistics Windows” on page 135
 “Application Control Windows” on page 146
 “System Log Window” on page 153
 “IDS Event Log Window” on page 155
Configuration and Tools windows are not discussed here. For information on
these windows, please see:
 “Configuring the Wireless Array” on page 157
 “Using Tools on the Wireless Array” on page 385
Note that the Status menu section may be collapsed down to hide the headings
under it by clicking it. Click again to display the headings. (See Figure 39 on
page 86)

Xirrus XR-520 Specifications

General

Brand	Xirrus
Model	XR-520
Category	Wireless Access Point
Language	English