Yamaha AR190 2021 - Depth Alarm Setting Screen; Maintenance Setting Screen; Factory Reset Screen

Instrument operation
60
Depth alarm setting screen
The water depth for the depth alarm can be
set.
To adjust the water depth setting:
1 Slider control
To reduce the water depth setting, drag the
slider to the left.
To increase the water depth setting, drag the
slider to the right.
TIP:
If the water depth is set to 0.0 m (0.0 ft), the
depth alarm will not operate.
Maintenance setting screen
This screen displays the number of hours that
the engine has been running since the last
maintenance.
After maintenance is performed, reset the
number of hours of operation as follows.
To reset the number of hours of operation:
(1) Tap the “Reset” button.
1 “Reset” button
(2) When the confirmation message ap-
pears, tap the “YES” button to reset the
number of hours of operation.
1 “YES” button
TIP:
To return to the maintenance setting screen
without resetting the number of hours, tap
the “NO” button.
Factory reset screen
This screen can be used to reset the settings
to their factory default settings.
Item Function
Saves the set water depth
as the current depth alarm
setting and displays the
setting screen.
Displays the setting screen
without saving the set wa-
ter depth.
Save Back
Depth Alarm
0.0
ft
Save
Back
1
BackReset
Time Since Last Maintenance
0
Hrs
BackReset
1
YES NOAre you sure ?
1
SportsBoat_F4V12.book Page 60 Thursday, June 4, 2020 5:17 PM
Downloaded from ManualsNet.com search engine