Yamaha AR190 2021 - Depth Alarm Setting Screen; Maintenance Setting Screen

Instrument operation
72
Depth alarm setting screen
The water depth for the depth alarm can be
set.
To adjust the water depth setting:
1 Slider control
To reduce the water depth setting, drag the
slider to the left.
To increase the water depth setting, drag the
slider to the right.
Maintenance setting screen
This screen displays the number of hours that
the engine has been running since the last
maintenance.
After maintenance is performed, reset the
number of hours of operation as follows.
To reset the number of hours of operation:
(1) Tap the “Reset” button.
1 “Reset” button
(2) When the confirmation message ap-
pears, tap the “YES” button to reset the
number of hours of operation.
Item Function
Sets the display units to
US units.
Sets the display units to
metric units.
Saves the selected unit
setting as the current units
and displays the setting
screen.
Displays the setting screen
without saving the select-
ed unit setting.
Item Function
Saves the set water depth
as the current depth alarm
setting and displays the
setting screen.
Displays the setting screen
without saving the set wa-
ter depth.
US Unit
Metric Unit
Save
Back
4.0
ft
Depth Alarm
BackSave
Save
Back
1
Time Since Last Maintenance
BackReset
0 Hrs
BackReset
1
SportsBoat_F4V12.book Page 72 Thursday, June 4, 2020 5:17 PM
Downloaded from ManualsNet.com search engine