Yamaha V50 - Page 55

OR ae Dott:
ee
—————————————EECaAaePErr—O
EEE
eg
os
(2) Pitch
# Function
Set the amount of vibrato depth regulated by the foot
controller.
E Setting:
0-99
# Explanation
This allows you to regulate vibrato depth using the
foot controller. As you advance the foot controller,
the depth of vibrato will increase. When the setting
is 0, the foot controller will have no effect, and when
the setting is 99, it will have maximum effect.
Note:
Unless the sensitivity “P Mod Sens” setting (see page
43) is raised, raising this setting will have no effect.
If a foot controller is not connected, the result
will be the same as when the foot controller is fully
depressed. This means that if you raise this setting,
vibrato will be applied continuously.
If you do not want to control vibrato using the
foot controller, set this to 0.
(3) Amplitude
E Function
Set the amount of tremolo or wah regulated by the
foot controller.
E Setting:
0-99
E Explanation
This allows you to regulate tremolo or wah using the
foot controller. As you advance the foot controller,
the amount of tremolo or wah will increase. When
the setting is 0, the foot controller will have no effect,
and when the setting is 99, it will have maximum effect.
Note:
Unless the (SENSITIVITY) AMS setting is
raised, and the AME of the appropriate operators is
on, raising this setting will have no effect (see page
43).
If a foot controller is not connected, the result
will be the same as when the foot controller is fully
depressed. This means that if you raise this setting,
tremolo or wah will be applied continuously.
If you do not want to control tremolo or wah
using the foot controller, set this to 0.
Modulation wheel (pitch, amplitude)
After pressing [| (FUNCTION), press the C]
below “MW” in the display.
Ame litugde
i4
i Wo BP a toe.
IT |
The modulation wheel is located to the left of the key-
board, and allows you to adjust the depth of vibrato,
tremolo, wah, etc. while playing.
Press the [__] below “> EXIT” in the display to
return to the previous display.
(1) Pitch
E Function
Set the amount of vibrato depth regulated by the
modulation wheel.
E Setting
0-99
E Explanation
This allows you to regulate vibrato depth using the
modulation wheel. As you advance the modulation
wheel, the depth of vibrato will increase. When the
setting is 0, the modulation wheel will have no effect,
and when the setting is 99, it will have maximum effect.
Note:
Unless the sensitivity “P Mod Sens” setting (see page
43) is raised, raising this setting will have no effect.
If you do not want to control vibrato using the
modulation wheel, set this to 0.
(2) Amplitude
#@ Function
Set the amount of tremolo or wah regulated by the
modulation wheel.
E Setting
0-99
E Explanation
This allows you to regulate tremolo or wah using the
modulation wheel. As you advance the modulation
wheel, the amount of tremolo or wah will increase.
When the setting is 0, the modulation wheel will have
no effect, and when the setting is 99, it will have
maximum effect.
Voice Edit 51