YASKAWA GA800

i.1 Receiving
YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting 13
■ Icons to Identify Screw Shapes
Table i.1 Icons to Identify Screw Shapes
Icon Screw Shape
Phillips/slot combo (+/-)
Slotted (-)
Minus (-)
Hex bolt (cross-slotted)
Hex bolt (slotted)
Icon Screw Shape
Hex self-locking nut
Hex socket cap (WAF: 5 mm)
Hex socket cap (WAF: 6 mm)
Hex socket cap (WAF: 8 mm)
◆ About Registered Trademarks
• CANopen is a registered trademark of CAN in Automation (CIA).
• CC-Link is a registered trademark of CC-Link Partner Association.
• DeviceNet is a registered trademark of Open DeviceNet Vendor Association, Inc. (ODVA).
• EtherCAT is a registered trademark of Beckhoff Automation GmbH.
• EtherNet/IP is a registered trademark of Open DeviceNet Vendor Association, Inc. (ODVA).
• LonWorks and LonTalk are registered trademarks of Echelon Corporation.
• MECHATROLINK-I, MECHATROLINK-II, and MECHATROLINK-III are registered trademarks of
MECHATROLINK Members Association (MMA).
• Modbus is a registered trademark of Schneider Electric SA.
• PROFIBUS-DP and PROFINET are registered trademarks of PROFIBUS International.
• Other company names and product names in this document are trademarks or registered trademarks of the
respective companies.