6.5 Items to Check before Starting Up the Drive
448 YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
◆ Make the Initial Settings
The keypad will show the Initial Setup screen when you energize the drive for the first time. You can set the date and
time and the keypad language. The Setup Wizard prepares the drive for operation, including setting the basic
parameters and doing Auto-Tuning. Refer to Set Parameters Using the Setup Wizard on page 477 for more
information.
Note:
If the keypad does not show the Initial Setup screen, select [Initial Setup] from the Main Menu to show the Initial Setup screen.
1. Make the initial settings for each item.
A - Language Selection
B - Set Date/Time
C - Setup Wizard
D - Show Initial Setup Screen
Note:
If you select [Yes] from the [Show Initial Setup Screen] setting, the keypad will show the Initial Setup screen each time the drive is
energized.
If you select [NO], the keypad will not show the Initial Setup screen each time the drive is energized, starting with the next time.
2. Push [Home].
The display shows the HOME screen.
To Next Page
Loading...
