YASKAWA GA800

6.6 Keypad Operation
470 YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
9. When you are done changing the value, push .
The parameter revision procedure is complete.
◆ Restore Modified Parameters to Defaults
This procedure will set all parameters with changed values to their default settings.
1. Push (Home) to show the HOME screen.
Note:
• The keypad will show [Home] in the top right corner when the HOME screen is active.
• If [Home] is not shown on , push (Back) to show [Home] on .
2. Push (Menu).
3. Push or to select [Modified Param / Fault Log], then push .
4. Push or to select [Modified Parameters], then push .
5. Push .