5.17 Wiring Checklist
426 YASKAWA TOEPYAIGA8001B GA800 Drive Maintenance & Troubleshooting
Checked No. Item to Check
7 Pick up all wire clippings.
8 Make sure that none of the wires on the terminal block touch other terminals or connections.
9 Make sure that you isolate the control circuit wiring from main circuit wiring in the control panel or in a duct.
10 Make sure that control circuit wiring is not longer than 50 m (164 ft).
11 Make sure that Safe Disable input wiring is not longer than 30 m (98 ft).
To Next Page
Loading...
