Knowledge of the regulations and proper technical implementation of the safety instruc-
tions in this manual by qualified personnel are prerequisites for the safe installation, com-
missioning and safety during the operation and maintenance of the feedback module.
Failure to comply with the instructions of this manual can lead to serious personal injury,
property damage or environmental harm, for which Yaskawa assumes no liability.
Yaskawa components and systems are developed, manufactured and tested in compli-
ance with the applicable standards. They may only be used under the specified environ-
mental conditions and only in connection with approved external modules.
The operating manual contains safety instructions, descriptions of the interfaces and
information on the phases of the product's life cycle:
n Planning
n Installation/Assembly
n Commissioning
n Validation
n Operation
n Modification/Retrofitting
n Troubleshooting
n Maintenance/Repair
n Disassembly
Sigma-5 and Sigma-7 Series SERVOPACKs
General
Use of This Manual
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en | 21
To Next Page
Loading...
Need help?
General
