When storing the SERVOPACK with the power OFF, store it in an envi-
ronment with the following temperature and humidity:
Ä
Chap. 4.2.1 ‘General Specifications’ page 30
Harmonized Standards
Ä
Chap. 1.7 ‘Compliance with UL Standards, EU Directives,
and Other Safety Standards’ page 15
Operating Conditions Overvoltage category: III
Pollution degree: 2
Protection class: IP00 (in installed condition depending on
the IP class of the SERVOPACK used)
Installation Conditions EMC Directive: Certification is required after installation in
the user’s machine under the conditions outlined in
Ä
Chap.
5.4 ‘EMC Installation Conditions’ page 40.
4.4 Board Outline
Installation Conditions for
Harmonized Standards
Sigma-5 and Sigma-7 Series SERVOPACKs
Specifications
Board Outline
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en | 32
To Next Page
Loading...
