Safety instructions draw attention to potential health hazards. To prevent personal injury
and equipment damage in advance, the following signal words are used to indicate safety
instructions in this document. The signal words are used to classify the hazards and the
degree of damage or injury that may occur if a product is used incorrectly. The general
safety sign in the following examples may be replaced by a specific sign in the case of
concrete safety instructions. Information marked as shown below is important for safety.
Always read this information and heed the precautions that are provided.
DANGER!
... notifies of an imminent dangerous situation which will lead to death or
serious injuries if not avoided.
WARNING!
... notifies of a potentially dangerous situation which can lead to death or
serious injuries if not avoided.
CAUTION!
... notifies of a potentially dangerous situation which can lead to minor or
slight injuries if not avoided.
Notes indicate how to use the product correctly and avoid damage to property.
NOTICE!
... notifies of a potentially dangerous situation which can lead to property
damage if not avoided.
... draw attention to useful tips and recommendations as well as informa-
tion for efficient and trouble-free operation.
Safety Instructions
Notices
Recommendations
Sigma-5 and Sigma-7 Series SERVOPACKs
General
Legend
| | Feedback Option Module Type 3 - Manual version C - Revision 0 | en | 8
To Next Page
Loading...
Need help?
General
