YASKAWA SGMAH - Page 360

Sigma II User’s Manual Chapter 8: Ratings and Characteristics
8 - 34
 Specifications for Servo Amplifier and Three-phase, 400V
Servomotor Combinations
*1
Allowable regenerative frequency is the number of times the servomotor is allowed to accelerate and
decelerate through a 0rpm → maximum motor speed → 0rpm cycle in a minute.
Voltage Three-phase 400V
Servo Amplifier Model
SGDH-
05DE 10DE 15DE 20DE 30DE 50DE 60DE 75DE 1ADE 1EDE
SGMGH Series
Applicable
Servomotor
Model
SGMGH-
05D 09D 13D 20D 30D 44D 55D 75D 1AD 1ED
Capacity
(kW)
0.45 0.85 1.3 1.8 2.9 4.4 5.5 7.5 11 15
Motor Speed
(rpm)
Rated 1500/maximum 3000
Rated 1500/
maximum 2000
Applicable Encoder
Standard: 17-bit incremental encoder
Continuous Output
Current
A
rms
1.9 3.5 5.4 8.4 11.9 16.5 20.8 25.4 28.1 37.2
Maximum Output Current
A
rms
5.5 8.5 14 20 28 40.5 55 65 70 85
Allowable Regenerative
Frequency
*1
(times/min)
42151012 8 1126183632
SGMSH Series
Applicable
Servomotor
Model
SGMSH-
— 10D 15D 20D 30D 40D 50D —
Capacity
(kW)
— 1.0 1.5 2.0 3.0 4.0 5.0 —
Motor Speed
(rpm)
Rated 3000/maximum 5000
Applicable Encoder
Standard: 17-bit incremental encoder
Continuous Output
Current
A
rms
— 2.8 4.7 6.2 8.9 12.5 13.8 —
Maximum Output Current
A
rms
— 8.5 14 19.5 28 38 42 —
Allowable Regenerative
Frequency
*
(times/min)
—473148202922 —