YASKAWA SGMAH - Power Supply Voltage

Sigma II User’s Manual Chapter 5: Parameter Settings and Functions
5-123
5.8.5 400V Power Supply Voltage
There are four types of SGDH servo amplifiers. The power supply voltages are:
single-phase 100V
ac
, three-phase 200V
ac
, single-phase 200V
ac
and three-phase
400V
ac
. For 100V and 200V servo amplifiers that use three-phase 400V
ac
power
supply, prepare the following voltage conversion transformers (single-phase or
three-phase).
Refer to the capacities shown in the following table when selecting a voltage
conversion transformer.
• Do not connect the servo amplifier directly to any voltage level other than what is specified on the ser-
vomotor.
Doing so will destroy the servo amplifier.
Primary Voltage Secondary Voltage
400V
ac
or 440V 200V
ac
400V
ac
or 440V 100V
ac
Voltage
Servo Amplifier
Model
Voltage capacity per
Servo Amplifier
*1
kVA
Single-phase
100V
SGDH-A3BE 0.15
SGDH-A5BE 0.25
SGDH-01BE 0.40
SGDH-02BE 0.60
Single-phase
200V
SGDH-A3AE 0.20
SGDH-A5AE 0.25
SGDH-01AE 0.40
SGDH-02AE 0.75
SGDH-04AE 1.2
SGDH-08AE-S 2.1
SGDH-15AE-S 4.0
CAUTION