YASKAWA Varispeed-606PC3

2 .
DIGITAL
OPERATOR (JVOP-114) (Cont'd)
~CONTINUOUS OPERATION AT MOMENTARY
POWER
LOSS
Even if a momentary power
loss
occurs,
operation can
be continued without any problem .
46=XXX0
1
st digit
0 : Continuous operation after momentary
power loss riot provided
l : Continuous operation after
momentary , power loss provided
Momentary power loss ride-thru time differs as
shown
below, according to the capacity of the models .
(common to both 3-phase and single-phase
series)
Note : If a power loss exceeds the momentary
power
loss
ride-thru
time, in the
momentary power
loss
assurance time after the power
loss, low voltage fault occurs, fault contact is output and the motor
coasts to a stop .
Item Name
Constant to be Set Factory Preset
Operation Selection after
Momentary Power
Loss
K61
0000
Speed Search Operation Level
15096 (fixed)
Minimum
Baseblock Time 0 .5
s
(fixed)
Models CIMR-PCU20P 1 to PCU20P7
CIMR-PCUBOP 1 to PCUBOP7
Approx . 1 sec .
CIMR-PCU40P2
to
PCU40P7
Models
CIMR-PCU21
P5 to
PCU23P7
CIMR-PCUB 1 P5 to PCUB3P7
Approx . 2 sec .
CI MR-PCU41 P5 to PCU43P7