YASKAWA Varispeed-606PC3 User Manual

2 . DIGITAL
OPERATOR (JVIOP-114) (Cont'd)
2
.3 FUNCTION/CONSTANT SETTING
2 .3 .1 DRIVE Mode and PRGM (Program) Mode
Selection of DRIVE mode
or
PRGM mode can be
performed by using the

DRIVE

key when the
inverter is stopped . When function selection or a
change of set value is required, switch to the PRGM
mode .
Operation is enabled .
- When stopped, LOCAL and REMOTE modes
can be switched with each other by depressing
L0' ;AE
key .
DRIVE mode

-
An operation can be performed by

R
U
N
STOP

or

R E

keys .
- Frequency reference value can be changed during
running .
PRGM
mode

Program (function selection, constant
setting) can
be changed
.
Operation is not enabled .
Display Contents of DRIVE Mode and PRGM Mode
- Display contents of the digital operator differ
according to selected mode
(I'RGM/DRIVE) .
The
constant group to be displayed is
changed
each
time display selection key
ED :S :P
L

is
depressed .
If a fault occurs, the contents are displayed .
Additionally, since the contents of the latest fault are
stored, maintenance, inspection or troubleshooting
can be performed
quickly
by
checking the contents
by the digital operator .

YASKAWA Varispeed-606PC3 Specifications

General

Brand	YASKAWA
Model	Varispeed-606PC3
Category	Inverter
Language	English