YASKAWA Varispeed-606PC3 User Manual

2 . D
[GITAL,
OPERATdR (JNfOP-114)
(Confd)
" Setting
Error
In the
following cases, the
set
value
blinks for 3
seconds and the
data before changing are returned .
When a value exceeding the
setting range is set
If
the following condition
is not satisfied in the
multifunction
input selection constant
setting
Multifunction input
selection 1 (No . 32)=Multifunction
input selection 2 (No .
33)
Multifunction input selection 1
(No .32)=Multifunction
input
selection 3 (No .34)
Multifunction input
selection 2 (No .33)=Multifunction
input
selection 3 (No .34)
If the
following conditions are not satisfied in the V/f
constant setting
Max .
output frequency (No .
02)!'=-=
Max .
voltage
output frequency
(No . 04) >Mid . output frequency
(No .05) - Min . voltage
output frequency (No . 07)
For the following setting,
intermediate output
frequency voltage (No . 06) is
disregarded
Intermediate
output frequency = Min .
output
frequency .
For
details, refer to "V/f
CHARACTERISTIC
SETTING"
on page 102 .
If the
following condition is not
satisfied in the
frequency
reference constant setting
Set frequency reference
(NoS . 13 to 17) , .5 Max . output
frequency
(No . 02) X Output frequency
upper limit
value (No
.
24)
For details, refer
to
"V/f
CHARACTERISTIC
SETTING"
on page 102 and
"OUTPUT
FREQUENCY
LIMIT" on page 111 .
If
the following condition is not
satisfied in the
frequency
reference upper / lower limit value setting
Frequency reference lower limit
value (No . 25)
s
Frequency
reference upper limit value (No
.
24)
2 1

YASKAWA Varispeed-606PC3 Specifications

General

Brand	YASKAWA
Model	Varispeed-606PC3
Category	Inverter
Language	English