YASKAWA VIPA System MICRO M13-CCF0000 - Page 219

Event ID Description
0x64: VSFC
0x66: VSFB
ZInfo3 : Block number
0xE503 Inconsistency of code size and block size in work memory
ZInfo1 : Code size
ZInfo2 : Block size (high word)
ZInfo3 : Block size (low word)
0xE504 Additional information for CRC error in work memory
ZInfo2 : Block address (high word)
ZInfo3 : Block address (low word)
0xE505 Internal error - Please contact the hotline!
0xE604 Multiple parametrization of a periphery address for Ethernet PG/OP channel
ZInfo1 : Periphery address
ZInfo3 : 0: Periphery address is input, 1: Periphery address is output
0xE605 Too many productive connections configured
ZInfo1 : Slot of the interface
ZInfo2 : Number configured connections
ZInfo3 : Number of allowed connections
0xE610 Onboard PROFIBUS/MPI: Bus error fixed
ZInfo1 : Interface
ZInfo2 : Not relevant to the user
ZInfo3 : Not relevant to the user
PK : Not relevant to the user
DatID : Not relevant to the user
0xE701 Internal error - Please contact the hotline!
0xE703 Internal error - Please contact the hotline!
0xE710 Onboard PROFIBUS/MPI: Bus error occurred
ZInfo1 : Interface
ZInfo2 : Not relevant to the user
ZInfo3 : Not relevant to the user
PK : Not relevant to the user
DatID : Not relevant to the user
0xE720 Internal error - Please contact the hotline!
0xE721 Internal error - Please contact the hotline!
0xE722 Internal error - Please contact the hotline!
0xE723 Internal error - Please contact the hotline!
0xE780 Internal error - Please contact the hotline!
0xE801 CMD - Auto command: CMD_START recognized and successfully executed
VIPA System MICRO
System specific event IDs
HB400 | CPU | M13-CCF0000 | en | 16-47 219