YASKAWA VIPA System MICRO M13-CCF0000 - Page 220

Event ID Description
0xE802 CMD - Auto command: CMD_End recognized and successfully executed
0xE803 CMD - Auto command: WAIT1SECOND recognized and successfully executed
0xE804 CMD - Auto command: WEBPAGE recognized and successfully executed
0xE805 CMD - Auto command: LOAD_PROJECT recognized and successfully executed
0xE806 CMD - Auto command: SAVE_PROJECT recognized and successfully executed
ZInfo3 : Status
0: Error
1: OK
0x8000: Wrong password
0xE807 CMD - Auto command: FACTORY_RESET recognized and successfully executed
0xE808 Internal error - Please contact the hotline!
0xE809 Internal error - Please contact the hotline!
0xE80A Internal error - Please contact the hotline!
0xE80B CMD - Auto command: DIAGBUF recognized and successfully executed
ZInfo3 : Status
0: OK
0xFE81: File create error
0xFEA1: File write error
0xFEA2: Odd address when reading
0xE80C Internal error - Please contact the hotline!
0xE80D Internal error - Please contact the hotline!
0xE80E CMD - Auto command: SET_NETWORK recognized and successfully executed
0xE80F Internal error - Please contact the hotline!
0xE810 Internal error - Please contact the hotline!
0xE811 Internal error - Please contact the hotline!
0xE812 Internal error - Please contact the hotline!
0xE813 Internal error - Please contact the hotline!
0xE814 CMD - Auto command: SET_MPI_ADDRESS recognized
0xE816 CMD - Auto command: SAVE_PROJECT recognized but not executed, because the CPU memory is
empty
0xE817 Internal error - Please contact the hotline!
0xE820 Internal message
0xE821 Internal message
0xE822 Internal message
0xE823 Internal message
0xE824 Internal message
0xE825 Internal message
0xE826 Internal message
0xE827 Internal message
VIPA System MICRO
System specific event IDs
HB400 | CPU | M13-CCF0000 | en | 16-47 220