YASKAWA VIPA System MICRO M13-CCF0000 - Page 224

Event ID Description
0xEA30 Internal error - Please contact the hotline!
0xEA40 Internal error - Please contact the hotline!
0xEA41 Internal error - Please contact the hotline!
0xEA50 PROFINET IO controller: Error in the configuration
ZInfo1 : Rack/slot of the controller
ZInfo2 : Device no.
ZInfo3 : Slot at the device
OB : Not relevant to the user
PK : Not relevant to the user
DatID : Not relevant to the user
0xEA51 PROFINET IO CONTROLLER: There is no PROFINET IO controller at the configured slot
ZInfo1 : Rack/slot of the controller
ZInfo2 : Recognized ID at the configured slot
PK : Not relevant to the user
DatID : Not relevant to the user
0xEA53 PROFINET IO CONTROLLER: PROFINET configuration: There are too many PROFINET IO devices con-
figured
ZInfo1 : Number of configured devices
ZInfo2 : Slot
ZInfo3 : Maximum possible number of devices
0xEA54 PROFINET IO controller: IO controller reports multiple parametrization of a periphery address
ZInfo1 : Periphery address
ZInfo2 : Slot
ZInfo3 : Data width
PK : Not relevant to the user
DatID : Not relevant to the user
0xEA61 Internal error - Please contact the hotline!
0xEA62 Internal error - Please contact the hotline!
0xEA63 Internal error - Please contact the hotline!
0xEA64 PROFINET IO controller/EtherCAT-CP: Error in the configuration
ZInfo1 : Too many devices
ZInfo1 : Too many devices per second
ZInfo1 : Too many input bytes per ms
ZInfo1 : Too many output bytes per ms
ZInfo1 : Too many input bytes per ms
ZInfo1 : Too many output bytes per device
ZInfo1 : Too many productive connections
ZInfo1 : Too many input bytes in the process image
ZInfo1 : Too many output bytes in the process image
VIPA System MICRO
System specific event IDs
HB400 | CPU | M13-CCF0000 | en | 16-47 224