2. Disconnect all the modules, which are connected to the CPU by moving the CPU
along with the extension module on the mounting rail.
3. Remove the CPU with a rotation upwards from the mounting rail.
4. Pull the locking levers of the CPU outwards until these engage audible.
CAUTION!
It is not allowed to mount the module sideways on the mounting rail,
as otherwise the module may be damaged!
5. For mounting pull the locking levers of the CPU outwards until these engage
audible. Plug the CPU from the top onto the mounting rail and turn the periphery
module downward until it rests on the mounting rail.
6. Rebind your modules by moving the CPU along with the extension module on the
mounting rail.
7. T
o fix the CPU at the mounting rail, move the locking levers back to the initial posi-
tion.
8. Remove the connectors, which are not necessary at the CPU.
VIPA System MICRO
Basics and mounting
Demounting > Demounting CPU
HB400 | CPU | M13-CCF0000 | en | 16-47 25
To Next Page
Loading...
