YASKAWA VIPA System MICRO M13-CCF0000

To Next Page

To Previous Page

Order no. M13-CCF0000

Lamp load 10 W

Parallel switching of outputs for redundant control of a load not possible

Parallel switching of outputs for increased power not possible

Actuation of digital input

Switching frequency with resistive load max. 1000 Hz

Switching frequency with inductive load max. 0.5 Hz

Switching frequency on lamp load max. 10 Hz

Internal limitation of inductive shut-off voltage L+ (-45 V)

Short-circuit protection of output yes, electronic

Trigger level 1 A

Number of operating cycle of relay outputs -

Switching capacity of contacts -

Output data size 12 Bit

Technical data analog inputs

Number of inputs 2

Cable length, shielded 200 m

Rated load voltage -

Reverse polarity protection of rated load voltage -

Current consumption from load voltage L+ (without load) -

Voltage inputs

Min. input resistance (voltage range) 100 kΩ

Input voltage ranges 0 V ... +10 V

Operational limit of voltage ranges +/-3.5%

Operational limit of voltage ranges with SFU -

Basic error limit voltage ranges +/-3.0%

Basic error limit voltage ranges with SFU -

Destruction limit voltage max. 30V

Current inputs -

Max. input resistance (current range) -

Input current ranges -

Operational limit of current ranges -

Operational limit of current ranges with SFU -

Basic error limit current ranges -

Radical error limit current ranges with SFU -

Destruction limit current inputs (electrical current) -

Destruction limit current inputs (voltage) -

VIPA System MICRO

Hardware description

Technical data > Technical data CPU

HB400 | CPU | M13-CCF0000 | en | 16-47 46

YASKAWA VIPA System MICRO M13-CCF0000 - Page 46