EasyManua.ls Logo

YASKAWA VS-606V7 Series - Page 209

YASKAWA VS-606V7 Series
223 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
208
126 017E Frequency Reference 15 0.00 to 400.0
Hz
0.01 Hz
(less than
100 Hz)/0.1
Hz (100 Hz
or more)
0.00 Hz Yes 67
127 017F Frequency Reference 16 0.00 to 400.0
Hz
0.01 Hz
(less than
100 Hz)/0.1
Hz (100 Hz
or more)
0.00 Hz Yes 67
128 0180 PID Control Selection 0 to 8 - 0 No 131
129 0181 PID Feedback Gain 0.00 to 10.00
Hz
0.01 1.00 Yes 134
130 0182 Proportional Gain (P) 0.0 to 25.0 0.1 1.0 Yes 133
131 0183 Integral Time (I) 0.0 to 360.0 s 0.1 s 1.0 s Yes 133
132 0184 Derivative Time (D) 0.00 to 2.50 s 0.01 s 0.00 Yes 133
133 0185 PID Offset Adjustment 100% to
100%
1% 0% Yes 133
134 0186 Upper Limit of Integral Values 0% to 100% 1% 100% Yes 133
135 0187 Primary Delay Time Constant
for PID Output
0.0 to 10.0 s 0.1 s 0.0 s Yes 134
136 0188 Selection of PID Feedback
Loss Detection
0 to 2 - 0 No 135
137 0189 PID Feedback Loss Detection
Level
0% to 100% 1% 0% No 135
138 018A PID Feedback Loss Detection
Time
0.0 to 25.5 s 0.1 s 1.0 s No 135
139 018B Energy-saving Control Selec-
tion (V/f Control Mode)
0, 1 - 0 No 125
140 018C Energy-saving Coefficient K2 0.0 to 6550 0.1 (Note 7) No 125
141 018D Energy-saving Control Voltage
Lower Limit at 60 Hz
0% to 120% 1% 50% No 126
142 018E Energy-saving Control Voltage
Lower Limit at 6 Hz
0% to 25% 1% 12% No 126
143 018F Power Average Time 1 to 200 1 = 24 ms 1 (24 ms) No 127
144 0190 Search Operation Voltage
Limit
0% to 100% 1% 0% No 127
145 0191 Search Operation Voltage
Step at 100%
0.1% to 10.0% 0.1% 0.5% No 127
No. Register
No. for
Trans-
mission
Name Setting Range Setting Unit Factory
Setting
Change
during
Opera-
tion
User
Set-
ting
Ref.
Page

Table of Contents

Related product manuals