EasyManuals Logo

Yealink SIP-T42S User Manual

Yealink SIP-T42S
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #179 background imageLoading...
Page #179 background image
Advanced Phone Features
169
- Press the line key 1, , or the Answer soft key on phone B.
The LED indicators of the line key 1 on phone A will illuminate solid red and phone B will
illuminate solid green.
To answer multiple calls on the shared line:
An incoming call arrives on the shared line when there is an active call on phone A’s line key 1.
The LED indicators of the line key 2 on both phone A and phone B will fast flash green. You can
answer the incoming call on either phone A or phone B. The LCD screen of phone A displays the
information of the incoming call (e.g., “Incoming call: 4604 Yealink”).
Note
Do one of the following on phone A:
- Press the line key 2. Phone B stops ringing.
- Press the Answer soft key. Phone B stops ringing.
- Press to access the new call.
Press or the Answer soft key. Phone B stops ringing.
The incoming call is answered and the original call is placed on hold. The LED indicators of the
line key 1 on phone A will slowly flash green and phone B will slowly flash red indicating that
there is the held call on the line key 1. The LED indicators of the line key 2 on phone A will
illuminate solid green and phone B will illuminate solid red indicating that there is an active call
on the line key 2.
You can also answer the call on phone B. Do one of the following on phone B:
- Press the line key 2. Phone A stops ringing.
- Press or the Answer soft key. Phone A stops ringing.
The LED indicators of the line key 2 on phone A will illuminate solid red and phone B will
illuminate solid green indicating that there is an active call on the line key 2. Meanwhile, The LED
indicators of the line key 1 phone A will illuminate solid green and phone B will illuminate solid
red indicating that there is an active call on the line key 1.
Note
If the number of incoming calls is greater than the configured line keys, the line keys will be used
by sequence circulation.
Make sure call waiting feature is enabled on phone A. For more information, refer to Call Waiting
on page 115.

Table of Contents

Other manuals for Yealink SIP-T42S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T42S and is the answer not in the manual?

Yealink SIP-T42S Specifications

General IconGeneral
ManualYes
Cables includedLAN (RJ-45)
Number of handles included1 pc(s)
Lines quantity12 lines
Phonebook capacity1000 entries
Number of VoIP accounts12
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Voice codecsCNG, G.711Mu, G.711a, G.723.1, G.726, G.729ab, VAD, iLBC
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 95 %
Display diagonal2.7 \
Display resolution192 x 64 pixels
AC adapter input voltage100 - 240 V
AC adapter output current1.2 A
AC adapter output voltage5 V
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Volume controlDigital
Number of programmable keys6
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports2
Networking standardsIEEE 802.3af
Ethernet LAN data rates10, 100 Mbit/s
Ethernet LAN interface typeFast Ethernet
Supported network protocolsSIP v1, SIP v2, LLDP/CDP/DHCP, OpenVPN, IEEE802.1X, IPv6, FTP/TFTP/HTTP/HTTPS
Weight and Dimensions IconWeight and Dimensions
Depth189 mm
Width212 mm
Height175 mm
Package depth223 mm
Package width246 mm
Package height120 mm

Related product manuals