User Guide for the SIP-T42S IP Phone
170
Placing a Call on Hold
To place a call on public hold:
1. Press the Hold soft key on phone A when party A and party C are talking.
The line key LEDs on phone A slowly flash green and phone B slowly flash red when the
shared line call is placed on hold.
To place a call on private hold:
1. Press the PriHold soft key or private hold key on phone A when there is an active call on
the shared line (You may need to press the More soft key to see the PriHold soft key).
The line key LED slowly flashes green on phone A when the shared line call is placed on
private hold.
Retrieving a Held Call
To retrieve a call placed on public hold:
You can retrieve the public held call on either phone A or phone B.
To retrieve the call on phone A:
1. Press the line key with the slow-flashing green LED indicator or the Resume soft key.
The conversation between phone A and phone C is retrieved.
To retrieve the call on phone B:
Do one of the following:
- Press the line key with the slow-flashing green LED indicator.
- Press the Resume soft key on phone A.
- Long press the desired line key.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
