Configuring Call Preferences
119
DTMF parameters for H.323 protocol on the system are described below:
Configures the DTMF type. You can
configure it for the StarLeaf Cloud
platform or H.323 call separately.
INBAND—DTMF digits are
transmitted in the voice band.
Auto—the system
automatically negotiates the
way (INBAND, RFC2833 or SIP
INFO) to transfer DTMF digits.
Default: Auto
Remote Control
Web User Interface
To configure DTMF type for StarLeaf Cloud platform via web user interface:
1. Click on Account->VC Platform.
2. Select StarLeaf from the pull-down list of Platform Type.
3. Select the desired value from the pull-down list of DTMF Type.
4. Click Confirm to accept the change.
To configure DTMF type for H.323 via web user interface:
1. Click on Account->H.323.
To Next Page
Loading...
