EasyManuals Logo

Yealink VC800 Administrator's Guide

Yealink VC800
295 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #237 background imageLoading...
Page #237 background image
System Management
223
To configure LAN Connection parameters via web user interface:
1. Click on Security->Security Control.
2. Select the desired value from the pull-down lists of Control Security Enabled.
3. Enter the desired password in the Control Security Password field.
4. Click Confirm to accept the change.
Using the API with a Serial Connection
You can use the API with a serial connection to control Yealink video conferencing system. The
USB port on the Yealink video conferencing system can be connected to the serial port on the
control system through a USB to RS-232 cable.
You must connect and configure the control system and the video conferencing system for
serial communication.
Serial Connection parameters are described below.
Parameter
Description
Configuration Method
Baud Rate
Configures the baud rate.
Available baud rates are:
2400
4800
9600
19200
38400
115200
Default: 115200
Web User Interface

Table of Contents

Other manuals for Yealink VC800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink VC800 and is the answer not in the manual?

Yealink VC800 Specifications

General IconGeneral
BrandYealink
ModelVC800
CategoryConference System
LanguageEnglish

Related product manuals