Yealink VC800 - Video & Audio Issues

Configuring System Settings
175
2. Enter the desired time in the ReLogOffTime (1-1000min) field.
3. Click Confirm to accept the change.
Key Tone
You can enable the key tone feature for the system to make a keyboard click sound effect (key
tone) when pressing a key on the remote control. If you disable this feature or system ringer
volume is adjusted to 0, the system will not play a key tone when you press the key on the remote
control.
Key tone is configurable via the remote control or web user interface.
The key tone parameter is described below:
Parameter
Description
Configuration Method
Key Tone
Enables or disables the key tone.
Default: On
Remote Control
Web User Interface
To configure the key tone via web user interface:
1. Click on Setting->General.