Administrator’s Guide for Yealink VC800 Video Conferencing System
258
3.
Enter the IP address or domain name of the syslog server in the
Server Name
field.
4. Click Confirm to reboot the system immediately.
Capturing Packets
The administrator can capture packets in three ways: capturing the packets via web user
interface, remote control or using the Ethernet software. Engineers can analyze the packets to
troubleshoot problems.
Packets parameters are described below:
Start and stop capturing packets or
export the captured packets.
Configures the count of the number of
packets to capture.
Default: 5
Packet Capture
Clip Bytes
Configures the number of bytes (in kb)
of the packet to capture.
Default: 1024
Configures the filter type of the packet
to capture.
Valid Values:
Custom—Customize the packet
filter string.
To Next Page
Loading...
Need help?
General
