Yealink VC800 - Auto Refuse Timeout

Administrator’s Guide for Yealink VC800 Video Conferencing System
154
2. Select the desired value from the pull-down list of Ringback Timeout(30-240).
3. Click Confirm to accept the change.
Auto Refuse Timeout
Auto refuse timeout defines a specific period of time within which the video conferencing
system will stop ringing if the call is not answered.
The auto refuse timeout parameters on the system are described below:
Parameter
Description
Configuration Method
Auto Refuse
Timeout
(30-240)
Configures the duration time (in
seconds) in the ringing state.
Default: 120
If it is set to 120, the system will stop
ringing if the call is not answered
within 120s.
Web User Interface
To configure auto refuse timeout via web user interface:
1. Click on Setting->Call Features.