Yealink VC800 - Safe Mode Call

Administrator’s Guide for Yealink VC800 Video Conferencing System
246
2. Select the desired value from the pull-down list of Abnormal Call Answering.
3. Click Confirm to accept the change.
Safe Mode Call
You can configure safe mode call feature to handle abnormal H.323 calls.
The safe mode call parameters on the system are described below:
Parameter
Description
Configuration Method
Safe Mode Call
Enables or disables the safe mode
call feature for H.323 incoming call
from public network.
 Disabled—do not use safe
mode call.
 Enabled—use safe mode call.
Default: Enabled
Note: If it is enabled, the system will
reject H.323 incoming call from
public network. If it is disabled, any
H.323 incoming call from public
network can be accepted.
Web User Interface
To configure safe mode call via web user interface:
1. Click on Setting->Call Features.