Yealink VC800 - Output Resolution

Administrator’s Guide for Yealink VC800 Video Conferencing System
198
Output Resolution
VC800 video conferencing system supports output resolution adjustment. You can adjust output
resolution of primary/secondary display device respectively.
Make sure the display device has connected to the VC800 codec before configuration.
The output resolution parameters on the system are described below.
Parameter
Description
Configuration Method
Display1
Configures the output resolution of
primary display device.
 1920×1080 60Hz
 1920×1080 50Hz
 1366×768 60Hz
 1280×720 60Hz
 1280×720 50Hz
 1024×768 60Hz
 800×600 60Hz
 720×480 60Hz
 640×480 60Hz
Default: 1920×1080 60 HZ
Note: The available output
resolutions depend on the display
device.
Web User Interface
Display2
Configures the output resolution of
secondary display device.
 1280×720 60Hz
 1280×720 50Hz
 1024×768 60Hz
 720×480 60Hz
 640×480 60Hz
Default: 1280×720 60Hz
Note: The available output
resolutions depend on the display
device.
Web User Interface
To configure output resolution via web user interface:
1. Click on Setting->Video & Audio.
2. Select the desired value from the pull-down list of Display1.