Yealink VC800 - Registering CPW90 to the CP960 Conference Phone

Configuring System Settings
159
To configure the site name via web user interface:
1. Click on Setting->General.
2. Edit the site name in the Site Name field.
3. Click Confirm to accept the change.
The display device will display the changed site name.
To configure the site name via the remote control:
1. Select More->Setting->Basic->Site Name.
2. Edit the site name in the Site Name field.
3. Select Save, and then press to accept the change.
The display device will display the changed site name.
Backlight of the CP960 Conference Phone
Backlight determines the brightness of the CP960 conference phone, allowing users to read
easily in dark environments. Backlight time specifies the delay time to turn off the backlight
when the phone is inactive.
You can configure the backlight time as one of the following types:
 Always On: Backlight is turned on permanently.
 15 s, 30 s, 10 min, 20 min, 30 min, 1 Hour, 2 Hour, 3 Hour, 4 Hour: Backlight is turned off
when the phone is inactive after a preset period of time. It is automatically turned on if the
status of the phone changes or any key is pressed.