Yealink VC800 - Page 156

Administrator’s Guide for Yealink VC800 Video Conferencing System
142
Parameter
Description
Configuration Method
 Equal
 Picture In Picture
Default: Picture In Picture
If it is set to Remote big Local small,
the remote video image is shown in
big size, and the local video image
below is shown in small size.
If it is set to Remote Full screen, the
remote video image is shown in full
size.
If it is set to Equal, the remote and
local video images are shown in the
same size.
If it is set to Picture In Picture, the
remote video image is shown in full
screen, and local video image is
shown in the PIP (Picture-in-Picture)
To configure default layout of single screen via web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Default Layout of Single Screen.
3. Click Confirm to accept the change.