Configuring Call Preferences
151
Default: Auto
If Auto is selected, the system will
negotiate the appropriate uplink
bandwidth automatically.
Specifies the maximum receiving
bandwidth for the system.
Default: Auto
If Auto is selected, the system will
negotiate the appropriate downlink
bandwidth automatically.
Remote Control
Web User Interface
To configure bandwidth via web user interface:
1. Click on Setting->Call Features.
2. Select the desired value from the pull-down list of Uplink Bandwidth.
3. Select the desired value from the pull-down list of Downlink Bandwidth.
4. Click Confirm to accept the change.
To configure bandwidth via the remote control:
1. Select More->Setting->Call Features->Bandwidth Settings.
2. Select the desired value from the pull-down list of Uplink Bandwidth.
3. Select the desired value from the pull-down list of Downlink Bandwidth.
To Next Page
Loading...
