Yealink VC800 - Muting or Unmuting the CPW90

Configuring System Settings
163
Parameter
Description
Configuration
Method
Synchronism
(15~86400s)
Configures the interval (in
minutes) for the system to
synchronize time and date with
NTP server.
Default: 1000.
Web User Interface
Daylight Saving
Time
Configures the Daylight Saving
Time (DST) type.
The available types for the
system are:
 Disabled-not use DST.
 Enabled-use DST.
You can manually configure
the start time, end time and
offset according to your
needs.
 Automatic-use DST.
DST will be configured
automatically.
You do not need to
manually configure the
start time, end time and
offset.
Default: Automatic
Remote Control
Web User Interface
Fixed Type
Configures the DST calculation
methods.
 By Date- specifies the
month, day and hour to be
the DST start /end date.
 By Week- specifies the
month, week, day and hour
the DST start /end date.
Note: It only works if the value
of Daylight Saving Time is set to
Enabled.
Web User Interface
Start Date
When the DST calculation
method is set to By Date.
Configures the time to start DST.
Note: It only works if the value
Web User Interface