Yealink VC800 - Page 204

Administrator’s Guide for Yealink VC800 Video Conferencing System
190
Parameter
Description
Configuration Method
camera.
Valid Values: 0-100
Default: 50
Web User Interface
Contrast
Configures the contrast of the
camera.
Valid Values: 0-100
Default: 49
Remote Control
Web User Interface
Noise Reduction
(2D)
Specifies the noise reduction (2D)
mode.
 Off
 Low
 Middle
 High
Default: Low
Remote Control
Web User Interface
Noise Reduction
(3D)
Specifies the noise reduction (3D)
mode.
Valid Values: 0-22
Default: 2
Remote Control
Web User Interface
WDR
Specifies the wide dynamic range.
 Off-do not use WDR
 1-5
Default: 2
Remote Control
Web User Interface
Hangup Mode
Enables or disables the camera to
flip the image view when camera is
handed at up-side-down position
Default: Off
Web User Interface
Camera Pan
Direction
Configures the pan direction of the
camera.
 Normal
 Reversed
Default: Normal
If the camera reversed mode is
enabled, the camera pan direction
will be reversed when pressing the
Web User Interface