Yealink VC800 - Page 208

Administrator’s Guide for Yealink VC800 Video Conferencing System
194
Parameter
Description
Configuration Method
Default: Enabled
FECC(SIP)
Enables or disables the FECC (SIP) protocol
for far site to control near camera. You can
configure it for the
Zoom/Pexip/BlueJeans/Mind/Custom
platform, SIP account or SIP IP call
separately.
Default:
For Zoom/Pexip/BlueJeans/Mind/Custom
platform and SIP IP call, the default value
is Enabled.
For SIP account, the default value is
Disabled.
Note: You cannot configure it for the
Yealink/StarLeaf Cloud platform.
Web User Interface
To configure FECC(H.323) camera control protocol for StarLeaf Cloud platform via web
user interface:
1. Click on Account->VC Platform.
2. Select StarLeaf from the pull-down list of Platform Type.
3. Select the desired value from the pull-down list of FECC(H.323).
4. Click Confirm to accept the change.