VC800 Video Conferencing System Introduction
7
Mute Indicator LED on the CPE90 Wired Expansion Mic:
The CP960 conference phone is muted.
The CP960 conference phone is ringing.
The CP960 conference phone is placing a call.
The CP960 conference phone is in a call and unmuted.
The CPE90 is not connected to the CP960 conference phone.
Battery indicator LED on the CPW90 wireless expansion mic:
Solid green for one second
and then off
Solid green for 3 seconds
and then off
The CPW90 is in the idle mode.
The CPW90 is fully charged.
The CPW90 is being charged.
Fast flashing red 3 times
and then off
The battery capacity is too low to turn on
the CPW90.
The battery capacity is less than 10%.
If you tap the mute button, the battery indicator LED on the
CPW90 is still off, this means the CPW90 is turned off.
Mute indicator LED on the CPW90 wireless expansion mic:
The CP960 conference phone enters the pre-dialing
screen.
The CP960 conference phone is in a call and unmuted.
The CP960 conference phone is receiving an incoming
call.
The CP960 conference phone is muted.
The CPW90 is in the registration mode.
The CPW90 has registered with the CP960 conference
phone, but the CPW90 is out of range.
The CPW90 has registered with the CP960 conference
phone, but the CP960 is turned off.
Flashing red and green
alternately
The CP960 conference phone is searching for the
CPW90 which has registered with it.
To Next Page
Loading...
