Yealink VC800 Administrator's Guide

Administrator’s Guide for Yealink VC800 Video Conferencing System
10
To control VC800 video conferencing system via the virtual remote control:
1. Click Home->Remote Control when the system is idle or during a call.
2. Click the keys on the virtual remote control to control the VC800 video conferencing
system.
3. Click Remote Control to hide the virtual remote control.
Configuring Remote Control
If your environment does not use remote control, you can choose to disable remote control
feature.
The remote control parameter is described below:
Parameter
Description
Configuration Method
Remote Control
Enabled
Enables or disables the remote
control feature.
Default: On
Note: If it is set to Off, you cannot
use remote control and virtual
remote control to control your video
conferencing system.
Web User Interface
To configure remote control via web user interface:
1. Click Setting->General.

Yealink VC800 Specifications

General

Brand	Yealink
Model	VC800
Category	Conference System
Language	English