Administrator’s Guide for Yealink VC800 Video Conferencing System
230
that encrypts and decrypts user page requests as well as the pages returned by the web server.
Both the HTTP and HTTPS port numbers are configurable.
Web server type parameters on the system are described below:
Enables or disables the user to
access the web user interface of the
system using the HTTP protocol.
Default: Enabled
Remote Control
Web User Interface
Specifies the HTTP port for the user
to access the web user interface of
the system.
Valid Values: 1-65535
Default: 80
Note: Ensure that the configured
port is not used.
Enables or disables the user to
access the web user interface of the
system using the HTTPS protocol.
Default: Enabled
Remote Control
Web User Interface
Specifies the HTTPS port for the user
to access the web user interface of
the system.
Valid Values: 1-65535
Default: 443
Note: Ensure that the configured
port is not used.
To configure web server type via web user interface:
1. Click on Network->Advanced.
2. Select the desired value from the pull-down list of HTTP.
3. Enter the desired HTTP port in the HTTP Port field.
4. Select the desired value from the pull-down list of HTTPS.
To Next Page
Loading...
