Troubleshooting
269
situation, the contents will be sent to the negotiated media address. This may lead to failure.
You can configure network address adapter to let the content to be sent to the actual public IP
address.
Network address adapter parameter is described below:
Enables or disables the network
address adapter feature.
Valid values:
Disabled- send contents to the
negotiated media address.
IP Adapter-send contents to
the actual public IP address.
Port Adapter- send contents
to the actual public port.
IP & Port Adapter- send
contents to the actual public IP
address and port.
Default: IP & Port Adapter
Note: IP address and port can be
negotiated through the SDP
protocol.
To configure the network address adapter via web user interface:
1. Click on Setting->Call Features.
To Next Page
Loading...
