Yealink VC800 - Directory

Configuring Network
65
The rport parameter on the system is described below:
Parameter
Description
Configuration Method
RPort
Enables or disables NAT Rport
feature. You can configure it for the
SIP account or SIP IP call separately.
Default: Enabled
Web User Interface
To configure rport feature for SIP account via web user interface:
1. Click on Account->SIP Account.
2. Select the desired value from the pull-down list of RPort.
3. Click Confirm to accept the change.
To configure rport feature for SIP IP call via web user interface:
1. Click on Account->SIP IP Call.