Yealink VC800 - Page 86

Administrator’s Guide for Yealink VC800 Video Conferencing System
72
Parameter
Description
Configuration Method
compressed package of VPN-related
files to the system first before
enabling the VPN feature. If you
change this parameter, the system
will reboot to make the change take
effect.
Upload VPN
Config
Uploads the compressed package of
VPN-related files (*.tar) to the
system.
Web User Interface
To configure VPN via web user interface:
1. Click on Network->Advanced.
2. In the VPN block, click Browse to locate the VPN file (*.tar) from your local system.
3. Click Upload to upload the file to the system.
4. Select the desired value from the pull-down list of Active.
5. Click Confirm to accept the change.
A dialog box pops up to prompt that the settings will take effect after a reboot.
6. Click Confirm to reboot the system immediately.
If VPN is selected, you display device will display icon.
To configure VPN via the remote control:
1. Select More->Setting->Advanced (default password: 0000) ->Advanced Network.