EasyManuals Logo

Yealink W60B Configuration Guide

Yealink W60B
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #21 background imageLoading...
Page #21 background image
BROADSOFT PARTNER CONFIGURATION GUIDE YEALINK W60B IP DECT PHONE 20-BD5561-00
©
2018 BROADSOFT INC. PAGE 21 OF 117
Application
Server
Bob's Phone
Joe's Phone
Subscriber Bob's Profile
Configuration
Line/Port:/AoR 2405551111_1
Auth UserID: bobsmith
Auth Password: bobs
Subscriber Joe's Profile
Configuration
Line/Port:/AoR 2405552222_1
Auth UserID: joebrown
Auth Password: joeb
Shared Call Appearance
Configuration
Bob's 2nd Line
Line/Port:/AoR 2405551111_2
Shared Call Appearance
Configuration
Joe's 2nd Line
Line/Port:/AoR 2405552222_2
Bob's Line
Joe's Line
Figure 2 Shared Call Appearance Configuration
Figure 2 shows that Bob and Joe each have two lines and that Bob shares a line with Joe
and Joe shares a line with Bob. The figure also shows the applicable Subscriber Profile
and Shared Call Appearance Configuration data for subscribers Bob and Joe.
When Bob (2405551111) is called, Bob’s first line and Joe’s second line will ring. When
Joe (2405552222) is called, Joe’s first line and Bob’s second line will ring.
The following steps show how to configure both phones for this Shared Call Appearance
configuration.
For configurations of SCA for the device, see the example in the following section.
4.4.1.1 Bob’s Phone Configuration MAC.cfg
This is the SCA configurations as specified in MAC.cfg, that is, 0015651130dc.cfg where
“0015651130dc” is the MAC address of the SIP phone.
The following steps are used to configure line 1 for Bob’s phone. This line rings when Bob
is called, so it has Bob’s authentication information.
Step Command Purpose
Step 1
Configure line as shared.
account.1.shared_line = 1;
Configure the line as “shared”
(as opposed to “private”).
Step 2
Set Register User ID.
Example:
account.1.user_name = 2405551111_1;
The register user ID must
correspond with the line/port
setting on BroadWorks.

Table of Contents

Other manuals for Yealink W60B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink W60B and is the answer not in the manual?

Yealink W60B Specifications

General IconGeneral
Dimensions130mm x 100mm x 25.1mm
Operating Temperature0°C to +40°C
DECT StandardsCAT-iq 2.0
Number of HandsetsUp to 8
Internal CallsYes
External CallsYes
Call HoldYes
Call TransferYes
3-way ConferenceYes
Call WaitingYes
MuteYes
RedialYes
DECT Radio CoverageUp to 50m indoors, 300m outdoors
PoEIEEE 802.3af Class 1
ConfigurationBrowser/phone/auto-provision
Wall MountableYes
Wireless TechnologyDECT
Channels120
Concurrent CallsUp to 8 concurrent calls
Audio CodecsG.722, G.711, G.729, G.726, iLBC, Opus
SecurityTLS, SRTP, HTTPS, 802.1X
Operating Humidity10 ~ 95%
Handset Registration8 handsets
Frequency Bands1880-1900 MHz
Operating RangeUp to 50m indoors, 300m outdoors
Humidity10-95%
ComplianceCE, FCC, RCM
Network ProtocolsSIP, HTTP, HTTPS, DHCP, DNS, NTP, STUN
Number of SIP AccountsUp to 8 SIP accounts
Storage Temperature-30°C to +70°C

Related product manuals