Yealink W60B Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE 20-BD5561-00
©
2018 BROADSOFT INC. PAGE 27 OF 117
4.5.1 BroadWorks User Service Configuration
Integration with the BroadWorks Xtended Services Interface for User Service
Configuration enables the phone to display and configure BroadWorks user services such
as Remote Office, BroadWorks Anywhere, Call Forwarding, and Simultaneous Ring. To
enable User Service Configuration, perform the following steps.
Step Command Purpose
Step 1
sip.authentication_for_xsi =
Example:
sip.authentication_for_xsi = 1
Enable the XSP authentication
mode.
0= BroadWorks User Login
credentials
1= SIP Authentication
credentials
Step 2
account.1.xsi.user=
account.1.xsi.password =
Example:
account.1.xsi.user= 2405551111
account.1.xsi.password = 123456
Set the Xsi login user name
and password for line 1.
Step 3
account.1.xsi.host =
Example:
account.1.xsi.host
=xsp1.iop1.broadworks.net
Set the IP address or domain
name of the Xsp server.
Step 4
account.1.xsi.server_type =
Example:
xsi.server_type =http
Set the transport type for Xsi.
Step 5
account.1.xsi.port =
Example:
account.1.xsi.port =80
Set the transport port for Xsi.
4.5.2 BroadWorks Directory Configuration
Integration with the BroadWorks Xtended Services Interface for directories enables the
phone to download personal, group, and enterprise directories from BroadWorks and
makes them available to a user via the phone menus. To enable this feature, perform the
following steps.
Step Command Purpose
Step 1
Enable the group directory to be
displayed on the IP phone.
Example:
bw_phonebook.group_enable = 1
Enable the group directory to
be displayed on the IP phone.
0 = Disabled
1 = Enable
Step 2
Configure the group directory name
displayed on the IP phone.
Example:
bw_phonebook.group_displayname =
Group
Configure Group as the group
directory name displayed on
the IP phone.
The default value is Group.
Step 3
Configure the group common directory
to be displayed on the IP phone.
Example:
bw_phonebook.group_common_enable = 1
Enable the group common
directory to be displayed on the
IP phone.
0 = Disabled
1 = Enable

Yealink W60B Specifications

General

Dimensions	130mm x 100mm x 25.1mm
Operating Temperature	0°C to +40°C
DECT Standards	CAT-iq 2.0
Number of Handsets	Up to 8
Internal Calls	Yes
External Calls	Yes
Call Hold	Yes
Call Transfer	Yes
3-way Conference	Yes
Call Waiting	Yes
Mute	Yes
Redial	Yes
DECT Radio Coverage	Up to 50m indoors, 300m outdoors
PoE	IEEE 802.3af Class 1
Configuration	Browser/phone/auto-provision
Wall Mountable	Yes
Wireless Technology	DECT
Channels	120
Concurrent Calls	Up to 8 concurrent calls
Audio Codecs	G.722, G.711, G.729, G.726, iLBC, Opus
Security	TLS, SRTP, HTTPS, 802.1X
Operating Humidity	10 ~ 95%
Handset Registration	8 handsets
Frequency Bands	1880-1900 MHz
Operating Range	Up to 50m indoors, 300m outdoors
Humidity	10-95%
Compliance	CE, FCC, RCM
Network Protocols	SIP, HTTP, HTTPS, DHCP, DNS, NTP, STUN
Number of SIP Accounts	Up to 8 SIP accounts
Storage Temperature	-30°C to +70°C