Yealink W60B Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE 20-BD5561-00
©
2018 BROADSOFT INC. PAGE 42 OF 117
W60B downloads a phone-specific file based on the phone’s MAC address using the
following file name format:
 <mac-address>.cfg
Add a BroadWorks device profile type file to Yealink W60B device profile with the settings
shown in Figure 14 %BWMACADDRESS%.cfg File.
After creating the device profile type file, upload <mac-address>.cfg extracted from the
CPE kit. Use the Browse button on the file definition screen. Be sure to click Apply after
uploading the file.
Example Device-specific File Settings
Figure 14 %BWMACADDRESS%.cfg File
5.2.2.2.2.3 Static Files
Static files are files such as firmware and media files that are not configurable and/or do
not make use of the dynamic BroadWorks Device Management tags. The Yealink W60B
requires the following static files:
 <firmware-version>.rom
 contactData.xml
 config.bin

Yealink W60B Specifications

General

Dimensions	130mm x 100mm x 25.1mm
Operating Temperature	0°C to +40°C
DECT Standards	CAT-iq 2.0
Number of Handsets	Up to 8
Internal Calls	Yes
External Calls	Yes
Call Hold	Yes
Call Transfer	Yes
3-way Conference	Yes
Call Waiting	Yes
Mute	Yes
Redial	Yes
DECT Radio Coverage	Up to 50m indoors, 300m outdoors
PoE	IEEE 802.3af Class 1
Configuration	Browser/phone/auto-provision
Wall Mountable	Yes
Wireless Technology	DECT
Channels	120
Concurrent Calls	Up to 8 concurrent calls
Audio Codecs	G.722, G.711, G.729, G.726, iLBC, Opus
Security	TLS, SRTP, HTTPS, 802.1X
Operating Humidity	10 ~ 95%
Handset Registration	8 handsets
Frequency Bands	1880-1900 MHz
Operating Range	Up to 50m indoors, 300m outdoors
Humidity	10-95%
Compliance	CE, FCC, RCM
Network Protocols	SIP, HTTP, HTTPS, DHCP, DNS, NTP, STUN
Number of SIP Accounts	Up to 8 SIP accounts
Storage Temperature	-30°C to +70°C