BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE 20-BD5561-00
©
2018 BROADSOFT INC. PAGE 40 OF 117
5.2.2.2.2 Define Device Profile Type Files
This section describes the BroadWorks Device Management configuration necessary to
identify the configuration files and other files that the Yealink W60B IP DECT PHONE
downloads.
To define the files, configuration templates, firmware and other files the W60B IP DECT
PHONE uses, they must be uploaded to BroadWorks. Download the Yealink W60B CPE
kit from BroadSoft Xchange at xchange.broadsoft.com. Extract the configuration files from
the Configuration Files folder of CPE kit. Obtain the firmware files directly from Yealink.
The following table identifies the Yealink configuration files distributed with the version 80
CPE kit.
File Name CPE Kit Template File
Name
File Type Description
System-level,
Device-specific,
Static, Time
BWMACADDRESS
.cfg
%BWMACADDRESS%.
cfg
Device-specific This file contains device specific
parameters that the phone needs to
load.
y000000000077.cfg y000000000077.cfg System-level This file contains system level
parameters that the phone needs to
load.
contactData.xml contactData1.xml Static This file contains the contact
information in XML format.
blacklist.xml blacklist.xml Static This file contains the blacklist contact
information in XML format.
DialPlan.xml DialPlan.xml Static Specifies the dialing rules.
AutoDST.xml AutoDST.xml Static Rules set of the beginning and end of
Day Light Savings Time.
TimeZoneAliasLab
els_Yealink+<mode
l>.properties
TimeZoneAliasLabels_Y
ealink-
<model>.properties
Time Zone
Alias
The Time zone Alias file is a
BroadWorks Device Management file
used to map time zone identifiers
between BroadWorks and Yealink
phones. A Time zone Alias file is
required for each model.
WebItemsLevel.cfg WebItemsLevel.cfg Static This file defines the access level of
configuration items in cfg format.
super_search.xml super_search.xml Static This file configures the search source
list in dialing.
The following table identifies other files that the Yealink W60B IP DECT PHONE downloads
from the server or uploads to the server. These files are not provided in the CPE kit and must
be obtained from Yealink.
File Name File Type Description
x.x.x.x.rom Static Device firmware file.
%BWMACADDRESS%-
local.cfg
Static Supported upload Define, the configuration used to record
the change of the phone.
To Next Page
Loading...
Need help?
General
