EasyManuals Logo

Yealink W60B Configuration Guide

Yealink W60B
117 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
BROADSOFT PARTNER CONFIGURATION GUIDE YEALINK W60B IP DECT PHONE 20-BD5561-00
©
2018 BROADSOFT INC. PAGE 9 OF 117
No Test item is not supported
NA Test item is not applicable to the device type
NT Test item was not tested
Caveats and clarifications are identified in the Comments column.
2.2.1 SIP Interface Capabilities
The Yealink W60B IP DECT PHONE has completed interoperability testing with
BroadWorks using the BroadWorks SIP Phone Interoperability Test Plan [5]. The results
are summarized in the following table.
The BroadWorks test plan is composed of packages, each covering distinct
interoperability areas, such as “Basic” call scenarios and “Redundancy” scenarios. Each
package is composed of one or more test items, which in turn are composed of one or
more test cases. The test plan exercises the SIP interface between the device and
BroadWorks with the intent to ensure interoperability sufficient to support the BroadWorks
feature set.
NOTE: DUT in the following table refers to the Device Under Test, which in this case is the
Yealink W60B IP DECT PHONE.
BroadWorks SIP Phone Interoperability Test Plan Support Table
Test Plan Package Test Plan Package Items Supported Comments
Basic
Call Origination Yes
Call Termination Yes
Session Audit Yes
Session Timer Yes
Ringback Yes
Forked Dialog Yes
181 Call Being Forwarded Yes
Dial Plan Yes
DTMF Inband Yes
DTMF RFC 2833 Yes
DTMF DTMF Relay Yes
Codec Negotiation Yes
Codec Renegotiation Yes
BroadWorks
Services
Third-Party Call Control Basic Yes
Third-Party Call Control Advanced No
Voice Message Deposit/Retrieval Yes
Message Waiting Indicator Yes Except for saved and urgent
message information.
Voice Portal Outcall Yes
Advanced Alerting Ringing No

Table of Contents

Other manuals for Yealink W60B

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink W60B and is the answer not in the manual?

Yealink W60B Specifications

General IconGeneral
Dimensions130mm x 100mm x 25.1mm
Operating Temperature0°C to +40°C
DECT StandardsCAT-iq 2.0
Number of HandsetsUp to 8
Internal CallsYes
External CallsYes
Call HoldYes
Call TransferYes
3-way ConferenceYes
Call WaitingYes
MuteYes
RedialYes
DECT Radio CoverageUp to 50m indoors, 300m outdoors
PoEIEEE 802.3af Class 1
ConfigurationBrowser/phone/auto-provision
Wall MountableYes
Wireless TechnologyDECT
Channels120
Concurrent CallsUp to 8 concurrent calls
Audio CodecsG.722, G.711, G.729, G.726, iLBC, Opus
SecurityTLS, SRTP, HTTPS, 802.1X
Operating Humidity10 ~ 95%
Handset Registration8 handsets
Frequency Bands1880-1900 MHz
Operating RangeUp to 50m indoors, 300m outdoors
Humidity10-95%
ComplianceCE, FCC, RCM
Network ProtocolsSIP, HTTP, HTTPS, DHCP, DNS, NTP, STUN
Number of SIP AccountsUp to 8 SIP accounts
Storage Temperature-30°C to +70°C

Related product manuals