Yealink W60B Configuration Guide

BROADSOFT PARTNER CONFIGURATION GUIDE – YEALINK W60B IP DECT PHONE 20-BD5561-00
©
2018 BROADSOFT INC. PAGE 53 OF 117
static.auto_provision.dhcp_option.enable =
#Configure the value (manufacturer of the device) of DHCP option 60.
static.auto_provision.dhcp_option.option60_value =
#Configure the custom DHCP option number. It ranges from 128 to 254.
static.auto_provision.dhcp_option.list_user_options =
#Configure AES key (16 characters) for decrypting the common CFG file.
static.auto_provision.aes_key_16.com =
#Configure AES key (16 characters) for decrypting the MAC-Oriented CFG
file.
static.auto_provision.aes_key_16.mac =
static.auto_provision.custom.upload_method =
static.auto_provision.custom.protect =
static.auto_provision.custom.sync =
static.auto_provision.url_wildcard.pn =
static.auto_provision.reboot_force.enable =
static.auto_provision.attempt_expired_time =
##########################################################################
#############
## Phone Features
##
##########################################################################
#############
#Enable or disable the phone to keep sending the SIP messages to the
outbound server; 0-Disabled, 1-Enabled (default);
sip.use_out_bound_in_dialog =
#Configure the registration random time (in seconds). It ranges from 0
(default) to 60.
sip.reg_surge_prevention =
#Enable or disable the transferee to display the missed call prompt when
receiving a semi_attended transfer call;
#0-Disabled, 1-Enabled (default);
transfer.semi_attend_tran_enable =
#Enable or disable the phone to complete the blind or attended transfer
through on-hook;
#0-Disabled (default), 1-Enabled;
transfer.blind_tran_on_hook_enable =
transfer.on_hook_trans_enable =
#Enable or disable to access the web user interface of phone using the
http/https protocol;
#0-Disabled,1-Enabled (default);
#Require Reboot;
static.wui.https_enable =
static.wui.http_enable =
sip.send_response_by_request =
sip.use_23_as_pound =
sip.rfc2543_hold =
sip.notify_reboot_enable = 1
phone_setting.emergency.number =

Yealink W60B Specifications

General

Dimensions	130mm x 100mm x 25.1mm
Operating Temperature	0°C to +40°C
DECT Standards	CAT-iq 2.0
Number of Handsets	Up to 8
Internal Calls	Yes
External Calls	Yes
Call Hold	Yes
Call Transfer	Yes
3-way Conference	Yes
Call Waiting	Yes
Mute	Yes
Redial	Yes
DECT Radio Coverage	Up to 50m indoors, 300m outdoors
PoE	IEEE 802.3af Class 1
Configuration	Browser/phone/auto-provision
Wall Mountable	Yes
Wireless Technology	DECT
Channels	120
Concurrent Calls	Up to 8 concurrent calls
Audio Codecs	G.722, G.711, G.729, G.726, iLBC, Opus
Security	TLS, SRTP, HTTPS, 802.1X
Operating Humidity	10 ~ 95%
Handset Registration	8 handsets
Frequency Bands	1880-1900 MHz
Operating Range	Up to 50m indoors, 300m outdoors
Humidity	10-95%
Compliance	CE, FCC, RCM
Network Protocols	SIP, HTTP, HTTPS, DHCP, DNS, NTP, STUN
Number of SIP Accounts	Up to 8 SIP accounts
Storage Temperature	-30°C to +70°C